Product Details:
Payment & Shipping Terms:
|
| Product Name: | UltraFiltration Membrane | Application: | For Wastewater Treatment Plant Equipment |
|---|---|---|---|
| Product Housing: | U-PVC Material | Membrane Material: | PVDF/PAN/PVC Material |
| Product Size: | 4''/ 6''/ 8''/ 10'' | Working Temperature: | 5~45℃ |
| Membrane Pore Size: | 0.01~0.1μm | Bacterial Remove Rate: | 99.99% |
| PH Range: | 2~12 | Designed Water Flow: | 0.2~5 T/ H |
| High Light: | 10'' uf membrane module,8'' uf membrane filter |
||
Cross Filter Hollow Fiber 4'' 6'' 8'' 10'' Ultrafiltration Membrane
Introduction
Ultra filtration membrane is a kind of micropore membrane that with the same aperture size, and the
specified aperture is 0.001-0.02 micrometer. Bring appropriate pressure at one side of the membrane, it can sift out the solute molecules that smaller than the aperture, so that can separate the molecule which is more than 500 Dalton (atomic mass unit) and the particle size is larger than 10 nm.
Application
Tap water, surface water ,ground water,lake water treatment for drinking water.
Industrious Wastewater Recyling Domestic Wastewater Treatment.
Pretreatment equipment for RO system and for seawater desalination Emergency drinking water system.
Other membrane seperation,purification ,and concentration process.
Specification
|
inflow (L/h) |
40-120 |
|
material |
PVDF,PVC,PAN |
|
operating pressure(Mpa) |
0.01-0.1 |
|
membrane area(m2) |
77 |
|
highest inflow pressure(Mpa) |
0.8 |
|
operating temperature |
45 ℃ |
|
PH range |
2-11 |
|
Virus removal rate(log) |
6 |
UltraFiltration backwashing cleaning process:
1.Configuration of Backwashing System
Backwashing system includes backwashing water tank, backwashing pump, and NaClO dosing device.
2.Backwashing Water Tank
Permeate water is usually used for backwashing. So a backwashing water tank is not essential and production water tank can be used directly.
3.Backwashing Pump
4.Backwash Dosing Device
Install a dosing device separately can avoid bacteria multiplication.
There are two conventional dosing forms: one is continuous addition of 1-5ppm NaClO to the feed water; the other is continuous addition of 10-15ppm NaClO in backwashing process.
Dosing device of NaClO includes the following equipments .
low fiber UF membrane module for water treatment equipment
W
Contact Person: Benson
Tel: 86-13530341575
Fax: 86-0755-27415005
