|
Product Details:
Payment & Shipping Terms:
|
| Application: | Water Purification,Waste Water Treatment,ro Membrane 4040 | Capacity: | 50G/75G/100G/200G/300G/400G,100000pcs/Month |
|---|---|---|---|
| Product Name: | Manufacturers 4040 4080 8040 Water Filter RO Membrane,75GPD Water Filter Ro Membrane For Water Purifier,Cheap 0.1 Micron Water Filter Hollow Fiber Membrane,Reverse Osmosis Membrane | Type: | Reverse Osmosis,Water Filter Parts,ro Membrane 4021 |
| Material: | Polyamide | Use: | Under Sink,Industrial,domestic,Other |
| Certification: | ISO9001,SGS,NSF42 | Active Membrane Area Ft2(m2): | 78 Ft2 |
| Max. Operating Pressure: | 150PSI | Test Pressure(psi): | 150 |
| High Light: | brackish ro membrane,industrial ro membrane |
||
150 PSI Brackish Water Ro Membrane
Product description:
The universal reverse osmosis membranes series products are suitable for the deep treatment,such as desalting and chroma purification from surface water, ground water, river water, lake water and tap water etc.
It can effectively remove various organic compounds such as salt, insecticide, herbicide, and THM precursor, bacteria and viruses.
It is widely used in various application fields such as chemical process water, drinking water and boiler make-up water of various scales, which can bring significant cost-effectiveness and high salt removal effect to customers.
Specification
|
Diameter: 4 inch |
|
Length: 40 inch |
|
Effective membrane area: 7.2m² |
|
Operating pressure psi (Mpa): 225(1.56) |
|
Capacity: 9.5 m³/d |
|
Desalting rate: 99.6% |
|
Recovery rate: 15% |
|
Max operating pressure(Mpa): 300(2.1) |
|
Max inflow temperature : 45℃ |
|
Max inflow SDI: 5 |
|
GPD(m³/d): 10500(40) |
|
Chemical cleaning PH range: 2-11 |
Function
1. Reverse osmosis membrane filter for remove of: Of certain VOC's. Chlorine,
taste and odor. The salt-doffing rate is 97%.
2. For water use only. This element fits most standard membrane Housing. Maximum
Water temperature120°F(52C) is nominal. Installation and housing design can affect
performance. The working pressure is 125Psi
3. CAUTION! For drinking water applications, do not use where the water is microbiologically
unsafe or with water of unknown quality without adequate disinfection before or after the
unit. Using with pre-filter and pump
4. WARNING! Plastic Wrap may cause sparks. Do not pen in an explosive environment.
Note: test methods
1. The water temperature is 25 ℃(77F), NaCl concentration 300 PPM, pH 7.5, test under the normal recovery rate and operating pressure.
2. Flow of the single membrane in average flow is between ±15%.
3. The lowest salt rejection is 95.0%.
Why choose us:
- Best quality with reasonable price
- Offer OEM services for all customers
- Fast ,accurate quotes and flexible payment
- Strong technical surpport,20 more year experience
- Membrane high mechanical strength, stable water quality, operation flux is big, long service life
